"The units are attached to the machine body. The first motor operates in the opposite direction of the feeding direction. The second motor operates in the opposite direction of the feeding direction. The second motor operates in the feeding direction. Both motors have a pneumatic jumping system. Milling up to 40 mm is available (60 mm optional).
Milling rotation speed: 9.000 rpm
Motor power: 2 x 3.7 kW
Blade height: 45 mm

When the pre-heating is use, the result of the sticking of the tape is stronger, specially in cold weathers. The edge of the panel that will be glueing is heated by IR-Lamps

Chain is lubricated automatically

One touch it changes from bevelling to starigh automatically; Two in one. 

Profile cutters for bevel edging
Straight cutters for straight edging
Jumping system for both bevel and straight units.

Bevelling pressure rollers
Edge banding grooving
Grooving and shaping the edge to achieve a smooth surface finish.

Up to 24 meter/minutes
Automatic lubricating for prismatic guieds
Self dust collectors for each end cutting.

Highlights

The rounding unit is equipped with two high-speed motors and operates successfully at a speed of 18 m/min. The unit is equipped with (diamond) cutters. 
Panel Thickness: 10-45 mm

Industrial solutions
Pressure beam with V-belt
Steel-made top pressure beam with V-belt ensures stable feeding.

Clean off dust on the workpiece to ensure for a clean and smooth finishing.

Use of a 2.2 kW high-frequency motor. Milling the adhesive surface of the workpiece. Effectively prevents edge breakage. reduces adhesive lines. provides a more aesthetic edge banding.

It is used to apply glue to the edge banding tape. The glue pot is a top-mounted glue pot that automatically draws the glue into the fast pre-melting box and then injects it into the glue pot through the pre-melting box. The advantage of the top-mounted glue pot is that it prevents glue carbonization and results in a thinner glue line. This gluing method ensures stronger adhesion by using adhesive in the shaping section and on the flat edge of the panel, providing more stable edge banding.

Angled Edge Pressing Device: The flat edge and angled edge sections are alternately pressed and shaped to ensure stronger adhesion.

There are a total of 2 motors for alignment, divided into front alignment and rear alignment, which are used to align the edge banding end surface. This system uses special saw blades to make the cutting surface smoother.

The use of a 2.2 kW high-frequency motor effectively prevents edge breakage by milling the adhesive surface of the workpiece, reduces adhesive lines, and provides a more aesthetic edge banding.

It is used to apply glue to the edge banding tape. The glue pot is a top-mounted glue pot that automatically draws the glue into the fast pre-melting box and then injects it into the glue pot through the pre-melting box. The advantage of the top-mounted glue pot is that it prevents glue carbonization and results in a thinner glue line. This gluing method ensures stronger adhesion by using adhesive in the shaping section and on the flat edge of the panel, providing more stable edge banding.

Angled Edge Pressing Device: The flat edge and angled edge sections are alternately pressed and shaped to ensure stronger adhesion.

There are a total of 2 motors for alignment, divided into front alignment and rear alignment, which are used to align the edge banding end surface. This system uses special saw blades to make the cutting surface smoother.

Intuitive and smart control panel is good for operation and easy for maintenance

The feed rail is equipped with a dog-pin to accurately position the workpiece and ensure a precision of 0.2 mm/m; the distance between the dog-pins is approximately 500 mm.

Rigid base, high power to achieve big capacity milling , Max. milling volume 5mm for each side.

Flexibly switches for various tapes required, simple operation and time-saving.

Highlights

Industrial solutions Steel-made top pressure beam with V-belt ensures stable feeding.

Mill the two ends of the edge banding strip sealed on the wooden board into an arc at right angles, making the edge banding of the wooden board more beautiful and smooth, ensuring the perfect tactile and visual effect of the workpiece processing.

3.7 kW
12.000 rpm
Jumping function

General Features

The units are attached to the machine body. The first motor operates in the opposite direction of the feed direction. The second motor operates in the feed direction. Both motors operate in the feed direction. Both motors have a pneumatic jumping system. Milling is available up to 40 mm (60 mm optional).
Milling rotation speed: 9.000 rpm
Motor power: 2 x 3.7 kW
Blade height: 45 mm

Corner rounding unit has two high speed motors
and able to work up to
20 m/min
Tools are Diamond
There is soft forming, post forming and 4 side edges corner rounding function.
Panel thickness: 10 - 45 mm

When the pre-heating is use, the result of the sticking of the tape is stronger, specially in cold weathers. The edge of the panel that will be glueing is heated by IR-Lamps

Chain is lubricated automatically

The units are attached to the machine body. The first motor operates in the opposite direction of the feed direction. The second motor operates in the feed direction. Both motors have a pneumatic jumping system. Milling is available up to 40 mm (60 mm optional).
Milling rotation speed: 9.000 rpm
Motor power: 2 x 3.7 kW
Blade height: 45 mm

Corner rounding unit has two high speed motors
and able to work up to
20 m/min
Tools are Diamond
There is soft forming, post forming and 4 side edges corner rounding function.
Panel thickness: 10 - 45 mm

When the pre-heating is use, the result of the sticking of the tape is stronger, specially in cold weathers. The edge of the panel that will be glueing is heated by IR-Lamps

Chain is lubricated automatically

General Features

The units are attached to the machine body. The first motor operates in the opposite direction of the feed direction. The second motor operates in the feed direction. Both motors have a pneumatic jumping system. Milling is available up to 40 mm (60 mm optional).
Milling rotation speed: 9.000 rpm
Motor power: 2 x 3.7 kW
Blade height: 45 mm

High-speed corner turning: speed: 26 m/min. Equipped with 4 correction motors, it is fast and stable in corner chamfering.

When the pre-heating is use, the result of the sticking of the tape is stronger, specially in cold weathers. The edge of the panel that will be glueing is heated by IR-Lamps

Chain is lubricated automatically

V-Belt Pressure;it provides wide contact with the part to be processed, offering better pressure and stability.

The units are attached to the machine body. The first motor operates in the opposite direction of the feed direction. The second motor operates in the feed direction. Both motors have a pneumatic jumping system. Milling is available up to 40 mm (60 mm optional).
Milling rotation speed: 9.000 rpm
Motor power: 2 x 3.7 kW
Blade height: 45 mm

Yüksek hızlı köşe dönme hız; 26 m/dk. 4 düzeltme motoruyla donatılmıştır, köşe pah kırmada hızlı ve stabildir.

When the pre-heating is use, the result of the sticking of the tape is stronger, specially in cold weathers. The edge of the panel that will be glueing is heated by IR-Lamps

Chain is lubricated automatically